Showing 18 items matching carving craft
-
Flagstaff Hill Maritime Museum and Village
Decorative object - Wood carving, David Hay, circa 1847
... carving craft... wood carving carving carving craft 1850 wreck john watson james ...This wood carving is handmade and comes from the Schooner Enterprise. The inscription on the rear of the carving was added at a later date. The statement that the vessel "was the first boat up the river Yarra with Fawkner" is incorrect, confusing this Warrnambool wreck "Enterprise" with Fawkner's vessel "Enterprize" (sometimes written "Enterprise"). THE “ENTERPRISE” 1847-1850 The wooden, two-masted schooner Enterprise was built in New Zealand in 1847 and registered in Melbourne, Australia. The Enterprise carried cargos of agricultural produce and other commodities for trade between the ports of the Colony. On September 14, 1850, the Enterprise was at anchor in Lady Bay under its Master, James Gardiner Caughtt, loaded with a cargo of wheat and potatoes. A strong south-easterly wind caused the vessel to drag on its only anchor and the rudder was lost. The gale-force wind blew it sideways and it became grounded. A local indigenous man, Buckawall, braved the rough sea to take a line from the shore to the Enterprise. All five members of the crew were able to make it safely to land. The Enterprise was wrecked. The Enterprise wreck was in an area called Tramway Jetty in Lady Bay. Since then the area became the location of the Lady Bay Hotel and now, in 2019, it is in the grounds of the Deep Blue Apartments. In fact, with the constantly changing coastline through built-up sand, the wreck site is now apparently under the No 2 Caravan Park on Pertobe Road, perhaps 150 metres from the high tide. Its location was found by Ian McKiggan (leader of the various searches in the 1980s for the legendary Mahogany Ship). DIFFERENTIATING the New Zealand Schooner “Enterprise” from John Fawkner’s “Enterprize“ Dr Murray Johns, Melbourne, says in his article The Mahogany Ship Story “… As I documented in 1985, the Warrnambool wreck was of an entirely different ship, also called Enterprize [with the spelling ‘Enterprise’], but built in New Zealand in 1847. Fawkner’s ship had already been sold to Captain Sullivan in 1845 and was wrecked on the Richmond Pier in northern New South Wales early in 1847. “ - (further details are in NOTES: and FHMV documents) The wood carving is significant for its association wreck of the Victorian Heritage Listed schooner Enterprise, VHR S238, being a New Zealand-built but Australian-owned coastal trader. The wreck was also significant for its association with indigenous hero Buckawall who saved the lives of the five crew on board.Wood carving; a handmade, carved wooden board from the vessel "Enterprise", 1847-1850. The board is made from several pieces of wood. It is concave, with engraved border and motifs, and has decorative scrolls on the sides. The inscription, added to the carving at a later date, is on the rear of the board and inscribed in blue ink script. A paper tag marked 'Swinburne' was with the board."Swinburne", "from the vessel Enterprise" Handwritten in blue ink script "Made from / wreck of / "Enterprise" first boat / up river Yarra with / Fawkner later wrecked / at Warrnambool Vic"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood carving, carving, carving craft, 1850 wreck, john watson, james gardiner caught, tramway jetty, lady bay, rescue line, ian mckiggan, vhr s238, relic, buckawall, schooner, enterprise, coastal trader, new zealand, indigenous rescue, indigenous hero -
The Beechworth Burke Museum
Sculpture - Carving, c1977
Carving of a large male head made by a patient of Mayday Hills Asylum. The sculpture has been roughly hewn from a single piece of wood.Mayday Hills Asylum was one of the three largest psychiatric hospitals in Victoria, and played an important role in the treatment of mental health illnesses from its establishment in 1867 to its closure in 1995. As part of prescribed treatment, many patients participated in craft activities were they were able to create an array of objects. A limb of a tree roughly carved into the shape of the man's face featuring heavy eyebrows, moustache and beard.beechworth, burke museum, mayday hills asylum, carving, wooden sculpture -
The Beechworth Burke Museum
Sculpture - Carving, c1977
Carving of a small female head made by a patient of Mayday Hills Asylum. The sculpture as been roughly hewn from a tree limb with multiple branches.Mayday Hills Asylum was one of the three largest psychiatric hospitals in Victoria, and played an important role in the treatment of mental health illnesses from its establishment in 1867 to its closure in 1995. As part of prescribed treatment, many patients participated in craft activities were they were able to create an array of objects. A limb of a tree roughly carved into the shape of a face, featuring a wide nose, protruding eyes, and flat mouth. On a limb section that extends above the head is a carving of a small totem-like face. Two small limb sections protruding from the back. Pen lines and figures on nose and ears.beechworth, burke museum, mayday hills asylum, sculpture, wood carving -
The Beechworth Burke Museum
Sculpture - Carving, c1977
Carving of a small female head made by a patient of Mayday Hills Asylum. A grid has been drawn across the top with Romanian letters written within the cells.Mayday Hills Asylum was one of the three largest psychiatric hospitals in Victoria, and played an important role in the treatment of mental health illnesses from its establishment in 1867 to its closure in 1995. As part of prescribed treatment, many patients participated in craft activities were they were able to create an array of objects. A limb of a tree roughly carved into the shape of a woman's face, featuring a thick hair style, slanted eyes, delicate mouth, and long neck. Pen notations on top of sculpture.beechworth, burke museum, mayday hills asylum, sculpture, wood carving -
Flagstaff Hill Maritime Museum and Village
Craft - Scrimshaw, Late 20th century
... plastic craft engraving carving ...The ship “Ellis” started life as the Clementina, launched in America in 1781. The vessel was first listed in Lloyd's Register in 1784 and under this name began serving as a slave ship sailing out of Liverpool. A Lloyd’s database records of slave-trading voyages by vessels from Liverpool makes it clear that Clementina was a slave trader. The next year Captain J. Elworthy sailed her to West Central Africa and St Helena. He transported his slaves to South Carolina. Then in 1785 Elworthy gathered slaves in the Bight of Biafra and the Gulf of Guinea Islands for delivery to Jamaica. In 1786 Bent & Co. purchased the Clementina and renamed her Ellis, presumably after the then owner Ellis Bent. She remained in the slave trade and In 1788 Captain John Ford sailed the now renamed Ellis to the Bight of Biafra and the Gulf of Guinea to gather slaves. He delivered this batch of slaves to the island of Grenada. The next year, 1789 the Ellis was almost completely rebuilt, and from the change in subsequent reports of her cargo loading or (burthen), she was enlarged. In 1791, Captain Joseph Matthews became master and sailed the Ellis to the Gold Coast then delivering his consignment of slaves to the island of St Vincent. During this voyage, some misfortune may have befallen Matthews because records show the Ellis command was transferred to Thomas Given. In 1792, Given sailed to the Bight of Biafra and the Islands in the Gulf of Guinea, again collecting slaves for delivery to Jamaica. There is a parallel record, also for 1793, that the Ellis under the command of Thomas Heart, undertook the same journey and with the same itinerary and cargo. In 1793, Bent & Co. decided to use the Ellis as a privateer with John Levingston as the master. After receiving a letter of "marque” on the 3rd of June 1793, that allowed any armed vessel to commit acts on the high seas which would otherwise have constituted piracy. Thus the Ellis began to operate as a combat ship under the endorsement of the British navy. The Ellis was three times captured first by the French frigate Gracieuse, under the command of Captain Chevillard on 22 July 1793. The French took her into service and renamed her as ”Elise”. Later that summer the Spanish captured her and in November ownership returned to the French who then renamed her the “Esperance”. On the 8th of June 1794, Esperance arrived in Jacmel, Saint-Domingue (present-day Haiti), from France with the official proclamation of the abolition of slavery. Leger-Felicite Sonthonax was one of the Civil Commissioners of Saint-Domingue and he had already unilaterally proclaimed the island for the French colony the year before amid a slave rebellion and attacks from British and Spanish forces. Ironically, Esperance also brought the news to the Civil Commissioners that the National Convention of France had impeached them on 16th July 1793 and ordered them to return promptly to France. On 8 January 1795, HMS Argonaut, under the command of Captain Alexander John Ball, captured Esperance while she was on the North America station. At this time the Esperance was armed with 22 guns (4 and 6-pounders) and had a crew of 130 men. She was under the command of Lieutenant de vaisseau De St. Laurent and had been out at sea for 56 days from Rochfort, bound for the American Chesapeake Bay area. The French ambassador to the United States registered a complaint with the President of the United States that Argonaut, by stating that by entering Lynnhaven bay, either before she captured Esperance or shortly thereafter, had violated a treaty between France and the United States. The French also accused the British of having brought the Esperance into Lynnhaven for refitting for a cruise. The British Consul replied that the capture had taken place some 10 leagues offshore as the bad weather had forced Argonaut and her prize to shelter within the Chesapeake area for some days, but that they had left as soon as practicable. Furthermore, Argonaut had paroled her French prisoners on arrival at Lynnhaven, and if she had entered American territorial waters solely to parole her French prisoners no one would have thought that objectionable. Royal Navy Service: Because the Esperance was captured in good order and sailed well, Rear Admiral George Murray, the British commander in chief of the North American station, put a British crew aboard and sent the Esperance out on patrol with HMS Lynx, under the command of John Poo Beresford, on 31st January. On 1st March the two vessels captured the Cocarde Nationale (or National Cockade), a privateer from Charleston, South Carolina, of 14 guns, six swivel cannons and a crew of 80 men. Esperance and the lynx went on to recaptured the ship Norfolk, of Belfast, and the brig George, of Workington. On 20 July, Esperance, in company with frigates Thetis and Hussar, intercepted the American vessel Cincinnatus, of Wilmington, sailing from Ireland to Wilmington. They pressed many men on board into service, narrowly missing the Irish revolutionary Wolfe Tone, who was on his way to Philadelphia. Esperance was formally commissioned in 1795 into the Royal Navy in August under the Command of Jonas Rose. On 4 May 1796 Esperance was sailing in company with HMS Spencer and Bonetta when they sighted a suspicious vessel. Spencer set off in chase while shortly thereafter Esperance saw two vessels, a schooner and a sloop, and she and Bonetta set off after them. Spencer sailed south by south-east and the other two British vessels sailed south-west by west, with the result that they lost sight of each other. Spencer captured the French gun-brig Volcan, while Bonetta and Esperance captured the French schooner Poisson Volant. The Esperance eventually arrived at Portsmouth on the 3rd of November 1797, the crew was paid off and on 31st May 1798 the Admiralty listed the Esperance for sale and she was sold in June 1798 for £600.The subject scrimshaw is a modern reproduction crudely done of a historic vessel and the scene is believed to be engraved onto a synthetic substance. Scrimshaw art crudely carved into non-natural material in the shape of a tooth. The line artwork is an image of a three-masted sailing ship with a poop deck, and anchors, are coloured black. Inscription is engraved into tooth.Engraved "Man o War Ellis" warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, scrimshaw, ellis, esperance, clementina, elise, hms ship, man of war, leter of marque, privateer, slave ship, slavery, ellis bent, american war of inderpendance, marine art, marine artifact, whale tooth, ivory tooth, resin, plastic, craft, engraving, carving -
Kiewa Valley Historical Society
Painting, Cattlemen of the Bogong High Plains, c1995
Leo Wimmer who lived locally was commissioned to do the painting for the Mt Beauty, S. K. Pearce Pty. Ltd., Supermarket as a display was wanted to fit against the blank walls opposite the cash registers (where the liquor store is now). His idea was to break up the parts in the painting and use these as large replicas painted on wood for the display. An official opening was held and Leo used the money earned to visit his homeland, Austria. Leo trained as a restorer of church art in Austria.This painting was commissioned for a Cattlemen's display behind the cash registers at the Mt Beauty S. K. Pearce Supermarket. Each part of the foreground was painted separately onto stand alone boards -the cattle, the hut, the grass and the Mt Beauty township. Leo Wimmer lived locally and was a professional frame conservator. Leo Wimmer specialised in gilding and worked at the National Gallery of Victoria and later the National Gallery of Australia (NGA Nov. 1981 - 1990) where he was responsible for conservation of gilded frames in the national collection. This involved crafting of missing pieces on period frames, conservation/restoration of gilded surfaces, crafting of period frames, and lecturing at galleries and institutions on gilding, wood carving, Australian frame history and crafting of period frames. Framed painting of Mt Bogong with cattle, Mt Beauty township and cattleman's hut in foreground.Circular watermark (illegible) on bottom right corner. "Wimmer / 1" is underneath the watermark.cattlemen; bogong high plains; s.k.pearce; mt beauty supermarket; leo wimmer; -
Federation University Art Collection
Work on paper - Artwork - Printmaking, 'Untitled', by Ludwig Hirshfeld-Mack, 1959
Ludwig HIRSCHFELD-MACK (1893-1965) Born 11 July 1893, Frankfurt am Main, Germany In 1940 Hirschfeld-Mack was deported to Australia from England as an enemy alien in the Dunera. He was interned at Hay and Orange, New South Wales, and at Tatura, Victoria. There he made a number of woodcuts that illustrated life under detention. Released in 1942 through the sponsorship of (Sir) James Darling, headmaster of Geelong Church of England Grammar School, Hirschfeld-Mack was appointed its art master. He promoted his pupils' self-knowledge, introduced them to avant-garde painting techniques, and encouraged wood-carving, weaving, musical instrument-making, leatherwork and other crafts. (http://adb.anu.edu.au/biography/hirschfeld-mack-ludwig-10510, accessed 29 June 2016) He died on 7 January 1965 at Allambie Heights, Sydney Framed abstract paintingSigned in pencil lower left hand side 'L.H.Mack 1959'art, artists, mack, hirschfeld-mack, ludwig hirschfeld-mack, ludwig hirshfeld-mack, printmaking, monoprint, bauhaus -
Tatura Irrigation & Wartime Camps Museum
Photograph, 1942
Handcrafts of Camp 3 interneesColour photograph of a superb hand crafted wooden tray with beautiful carving. A flash light reflection is an indication of its highly polished finish.camp 3, templer society -
Buda Historic Home & Garden Castlemaine
Domestic furniture, Timber hand-carved boot stool, c1900
... of the twentieth century. gertrude leviny wood carving arts and crafts ...The British Arts and Crafts Movement was a major influence on handcrafts made by the Leviny women at Buda. This Movement spread knowledge of craft techniques in the decorative arts and encouraged women to partake in fields that had traditionally been the domain of men, such as metalcraft and woodwork. The Leviny women studied art, design and craft techniques at the Castlemaine School of Mines from the 1890s to the early 1900s and this boot stool, hand-carved by Gertrude, is an example of the influence of the Arts and Crafts Movement on her decorative art. See: Zilles, Lauretta (2010), Buda and the Leviny Family, Castlemaine: Buda Historic Home & Garden Inc.This is a rare example of a unique hand-carved boot stool made in Australia by Gertrude Leviny in the British Arts and Crafts Movement style at the turn of the twentieth century.Timber boot stool, hand-carved by Gertrude Leviny. Made using the 'chip carving' technique, with dragon heads on upright at one end, and plant design in relief on the seat. Timber finish has a blackened effect.'K/40' (Old Registration Number)gertrude leviny, wood carving, arts and crafts movement, buda, castlemaine, dragon's heads, c1900, domestic furniture, castlemaine school of mines -
Tatura Irrigation & Wartime Camps Museum
Sculpture - Wood Carving, Kurt Lewinski, The Stacker, 1940's
Depicts a member of the AMF 8th Employment Co. Made by former camp 2 Tatura internee after his release in January 1942. At the 8th employment company at Tocumwal. Kurt Lewinski was a Dunera boy. Formerly a refugee of England 1938, originally from Berlin. Transported to Australia in 1940.Wood carving or sculpture of a man stacking boxes at a railway station.K. Lewinski 1944 Huon Pine (stained)wood sculpture, internee hand craft, dunera boy, kurt lewinski -
Wangaratta RSL Sub Branch
Artwork, other - Wooden artefacts
Wooden artefacts from the Sepik River region in Papua New Guinea. Different tribes living along the river produce magnificent wood carvings, clay pottery and other art and craft. Kundu is the Papuan general name used for drum. It is an hour glass shaped drum made of wood with a snake's skin as membrane. A handle is placed on the narrowest part of the drum. Often, the kundu is decorated with animal figures on its edges. - donated by John Nelson TAYLOR QX25010,2900269,3108420 who served in the AIF 19/1/1941 to 7/12/1945 - Regular Army Special Reserve 30/1/1952 to 29/1/1955 and the CMF 1/8/1959 to 2/1/1960. Rank on final discharge - Trooper 8/13 Victorian Mounted Rifles. John was deployed overseas to New Guinea from 17/10/1943 to 23/2/1945 and 5/5/1945 to 26/10/1945 and served in Korea and Japan from 5/3/1953 to 6/4/1954. A member of the Wangaratta RSL he passed away in January, 2021.Wooden artefacts from the Sepik River region in Papua New Guinea. The Sepik area is well known for its sculpture masks shields and other artifacts. Many tribes use drums in rituals. Two decorative wooden face masks, one wooden Drum and one wooden Crocodilepapua new guinea, artefacts, wood, ww2 -
Federation University Historical Collection
Booklet, Ballarat School of Mines Prospectus A and B, 1916-7, c1917
The Ballarat Technical Art School was part of the Ballarat School of Mines.1) Ballarat School of Mines Prospectus A .2) Ballarat School of Mines Prospectus B Contents includes teaching staff, school hours, curriculum, fee list, Travelling concessions, school library, classification of subjects. scholarships, Full art and Craft Courses (Industrial Design; Figure, Modelling, Painting and Design; Figure Drawing, Modelling, Painting and Design; Fashion Plate Drawing; Black and White Illustration; Modelling; Wood Carving and Lettering; Art Metal Work; Retouching, colouring, &c; Architectural Diploma; Draughtsmen's Courses; Art Teachers' Courses; Outdoor Sketching Classes; Photography; Building Construction and Architectural Drawing; Ticketwriting; Signwriting and Decorating COurse; Dressmaking, Needlework, etc; Preparatory Technical Classes for Girls; Day Commercial Classes; Other Branches of the School's Activities, examination results; Art Teachers' Certificate. Includes an image of W.H. Middleton, President of the Ballarat School of Mines; Staff of the Ballarat School of Minesballarat school of mines, ballarat technical art school, design, modelling, figure drawing, fashion plate drawing, black and white illustration, wood carving, lettering, art metal work, retouching, architecture, architectural diploma, draughtsmen's courses, art teachers' courses, outdoor sketching classes, photography, building construction, architectural drawing, ticketwriting, signwriting and decorating, dressmaking, needlework, art teachers' certificate. -
Hymettus Cottage & Garden
Chair, Chip carved chair
Chip carving was a popular hobby/pastime from the arts and crafts movement of the 1890s and remained a popular folk art until the 1920s.This is an example of a popular folk art hand-carved chair made in Australia in the early twentieth century.Hand-carved timber chair, by an unknown enthusiast in the Warrnambool area. Made using the 'chip carving' technique, with whorls and star design in relief on the seat. The timber finish has been given an ebonised tone. Chip carvings -
Federation University Historical Collection
Booklet - Ephemera, Preparatory Technical School of Girls, c1919
The aims of the School was "To provide a Technical Training which will prepare girls for their future life's work. This school provides a continuity of study between the Primary and Senior Technical School (School of Mines) classes. This supplies a long felt want in giving a preliminary training for Technical Art, Craft, Commercial, and Industrial Education. It must, however, be distinctly understood that these Preparatory Classes do not fully qualify girls in any of the subjects, but rather discover their aptitude for some line of technical work and thoroughly prepare the to specialise in that particular branch.Prospectus for girls technical education at the Ballarat School of Mines and the Ballarat Technical Art Schoolgirls education, ballarat technical girls' school, ballarat school of mines, ballarat technical art school, commercial, leatherwork, photography, ticket witing, wood carving, drawing, metal work, lithography, dressmaking, millinery, industrial design, scholarships, shorthand, typewriting, ceramics, bookbinding, french polishing, wood inlay -
J. Ward Museum Complex
Craft - Bird Carving
... Bird Carving Craft Bird Carving A red house-brick carved ...A red house-brick carved into the shape of a bird by a J Ward patient.Previously broken and repaired at necklinecarving brick bird -
Flagstaff Hill Maritime Museum and Village
Craft - Scrimshaw, Gary Tonkin, Master Scrimshander, Bringing in the Whale, 1980s
When scrimshaw is mentioned, most people think of carving on sperm whale teeth only. But scrimshaw also includes engravings on skeletal whale bone–such as the jaw bone, called pan bone and ivory from other marine mammals such as walrus. Although scrimshaw is widely associated with nautical themes and designs of the 19th century whaling industry, vintage scrimshaw was also produced as tribal art in many cultures. Today, scrimshaw is recognized as a unique medium in which present-day artists have developed their own modern themes. Scrimshaw reproductions may take several forms. There are - New carvings on genuine ivory or bone with the deliberate intent to create an "antique” - New carvings on genuine ivory or bone sold as signed and dated contemporary art - Clearly marked synthetic museum reproductions and mass marketed - Unmarked synthetic replicas This scrimshaw work is done on a sperm whale's tooth. It is one of two pieces by artist Gary Tonkin in Flagstaff Hill’s collection. Sperm whales can live for 60 or even 70 years, so the tooth could be quite old. It came from the whaling station in Albany, Western Australia, which ceased processing whales in 1978 and is now a whaling museum. The two works were commissioned by Flagstaff Hill in the 1980s. Tonkin could spend from a few days to a few months in intensive work on each piece of scrimshaw. He is a world-renowned Master Scrimshander and a Fellow of the Australian Society of Marine Artists (FASMA), and lives in Albany, Western Australia. Gary Tonkin, FASMA – Tonkin was born in 1949 in Portland, Victoria, and grew up there with a history of whaling and related industries. He moved to Albany in southwest WA in 1971 and worked as an Export Meat inspector for the Federal Government. This small town also had a historical connection to whaling. The Cheynes Beach Whaling Station was still operating, and there were even three whaling ‘chaser’ vessels at the old jetty. In 1975, his employment now permanent, Tonkin bought an old cottage near the bay, purchased some whales’ teeth, and began learning the sailors’ art of scrimshaw, combining this with his artistic skills and knowledge of history. His job gave him access to buy as many whale teeth as he could afford, straight from the whaling station. Tonkin gained further marine knowledge as he sailed on the schooner ‘Esperance’ from Fremantle to Mauritius in 1988. He watched the sailors at work and experienced the rough and stormy sea conditions first-hand. Tonkin later visited whaling museums, galleries and libraries in England and America to gather reference materials and information on all aspects of whaling and scrimshaw. In 1993 he was Commissioned to engrave six large whale teeth, from the Albany whaling station, for the USA Gallery at the Australian National Maritime Museum in Sydney. This work is now in the museum’s permanent collection. From that time, Tonkin began working full-time as a Scrimshander. Tonkin’s work is now in galleries and museums in America and Australia, as well as in private collections. He is the founder of the Albany Maritime Heritage Association and was the inaugural President. In the 1990s he actively and successfully campaigned for the preservation of the Cheynes Beach Whaling Station in Albany, which is now Whale World, an open-air whaling museum. His continuing work as a Scrimshander contributes to the preservation of the art of scrimshaw and the history of whaling. This scrimshaw represents the ancient craft of scrimshaw, associated with mariners in the whaling trade in the early 19th century. The work is also Nationally significant for being created by world-renowned Scrimshander, Gary Tonkin, from Albany, Western Australia. Scrimshaw; whale tooth carved with an image of two whaleboats hauling a dead whale back to the mother ship. Inscribed Title and signature of artist Gary Tonkin.Inscribed "Bringing in the whale". Signature "G Tonkin"flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, maritime museum, flagstaff hill, perth, whaling, whales, australia, scrimshaw, scrimshander, gary tonkin, g tonkin, bone, tooth, craft, albany, western australia, cheynes beach whaling station, whale world, portland, engraving, maritime art, sperm whale's tooth, albany whaling station, albany whaling museum -
Flagstaff Hill Maritime Museum and Village
Craft - Scrimshaw, After 1975
... flagstaff-hill-maritime-village Craft Work Carving on Bones Whale ...When scrimshaw is mentioned, most people think of carving on sperm whale teeth only. But scrimshaw also includes engravings on skeletal whale bone–such as the jaw bone, called panbone–and ivory from other marine mammals such as walrus. Although scrimshaw is widely associated with nautical themes and designs of the 19th century whaling industry, vintage scrimshaw was also produced as tribal art in many cultures. Today, scrimshaw is recognized as a unique medium in which present-day artists have developed their own modern themes. Scrimshaw reproductions may take several forms. There are - New carvings on genuine ivory or bone with the deliberate intent to create an "antique” - New carvings on genuine ivory or bone sold as signed and dated contemporary art - Clearly marked synthetic museum reproductions and mass marketed - Unmarked synthetic replicas Painstakingly carved deliberate replicas are directed towards the scrimshaw collector and seldom appear in the general market. Pieces of contemporary art and museum copies are usually clearly marked and openly sold for what they are. The biggest problems in the general antiques market are the mass produced synthetic reproduction pieces, such as this item, that can be mistaken for the genuine item. The scrimshaw is a modern reproduction of a typical scrimshaw scene and engraved onto a synthetic substance. It has been created as a decorative piece and is currently displayed as a representation of the craft of scrimshaw.Scrimshaw carved on a non-natural material in the shape of a whale tooth. Engraving depicts a grizzly bear with two cubs next to a fallen tree. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, craft work, carving on bones, whale bone carving, engraving, scrimshaw, carving, reproduction scrimshaw -
Mission to Seafarers Victoria
Furniture - Sanctuary chairs, pair, Gladys Hawkey (1886-1974), c. 1917
William Scott Purves Godfrey (1872-1953) designed the chairs and Miss Gladys Hawkey (1886-1974) carved them. W.S.P Godfrey was born in Toorak on 6 April 1872. He was was the cousin of Ethel Godfrey. Educated in Brussels and at Melbourne Grammar, he studied Architecture at the University of Melbourne. He and Henry Howard Spowers established the architectural firm Godfrey & Spowers, known for the design of the Argus building, around 1901. W S P Godfrey retired from practice in 1944. He died in August 1953, aged 81. He's buired in the St Kilda Cemetery with the Godfrey family. Gladys Hawkey was a member of the Guild. (photographed during the Norla Fete). She was born in Sandhurst, Bendigo and is buired in the Bendigo Cemetery. Little is known about Gladys Hawkey. She may have been a student of Robert Prenzel. Another mention of her work is made in an article in 1915 where her escritoire is offered in a raffle to raise funds for the Australian sick and Wounded. The chairs were donated in 1919 when the Flinders Street mission was open. In a style of Robert Prenzel with Australian Flora, the chairs are in the typical Arts and Crafts style. Like many women from the early 1900s, she was likely to have been inspired by the Australian exhibition of women's work and other female woodworkers of the time.Handcarvedgladys amy hawkey (1886-1974), william scott purves godfrey (1872-1953), lhlg, ladies harbour lights guild, chapel, flinders street, mission to seafarers, seamen's mission, wood carving, godfrey and spowers, heritage listed, arts and crafts, gifts-1917